Artis Laminates
Main Site ↗Find a Distributor

Built to standard

Quality you can verify.

Artis decorative laminates are High Pressure Laminate (HPL) sheets conforming to IS:2046-1995 Type S, ISI licensed under CM/L-9100141909, IGBC certified, and made in India — a phenolic product that resists scratches, heat, water, abrasion and daily wear.

The Artis Advantage

Phenolic Product
Uniform Thickness
Water Resistant
Heat Resistant
Scratch Resistant
Abrasion Resistant
Easy Clean
Carpenter Friendly

Standards & certifications

ISI MarkLicence CM/L-9100141909Bureau of Indian Standards
IS:2046-1995 Type SDecorative laminate standardConforms
IGBCGreen-product markIndian Green Building Council
Made in IndiaYamunanagar, HaryanaArtis Laminates Pvt Ltd

Technical specifications

Tested to IS:2046-1995 Type S. Every Artis sheet conforms to the specified values below.

PropertyIS:2046-1995 Type SArtis
Resistance to surface wear350 revolutionsConforms ✓
Resistance to dry heat (180 °C)Not worse than 4Conforms ✓
Resistance to immersion in boiling waterMass +7.5% · thickness +8.5% (max)Conforms ✓
Resistance to impact (small-diameter ball)20 N (minimum)Conforms ✓
Resistance to scratching2 N (minimum)Conforms ✓
Resistance to stainingNot worse than 5Conforms ✓
Resistance to cigarette burnsNot worse than 3Conforms ✓
Resistance to steamNot worse than 4Conforms ✓
Resistance to colour change (xenon light)Not worse than 6Conforms ✓

What is HPL?

High Pressure Decorative Laminated Sheets — HPL, commonly called sunmica — are built from multiple layers of kraft paper impregnated with phenolic resin, topped with a printed decorative layer and fused under high heat and pressure. That phenolic core is what makes the sheet hard, stable and durable. Artis makes HPL in three lines: the premium 1mm Artis, and the 0.8mm Woodrica and Artvio ranges, plus the 0.72mm Fine Decor economy line.

Questions, answered

Yes. Artis laminates are ISI-marked under BIS licence CM/L-9100141909 and conform to IS:2046-1995 Type S, the Indian Standard for decorative laminates.

IS:2046-1995 Type S — the Bureau of Indian Standards specification for high-pressure decorative laminates. Artis sheets are tested to and conform with its requirements.

Yes. As high-pressure laminates they withstand dry heat to 180 °C, boiling-water immersion, steam and staining, resist scratching (2 N) and pass the IS:2046 surface-wear test at 350 revolutions.

They are High Pressure Decorative Laminated Sheets (HPL, also called sunmica) — layers of kraft paper bonded with phenolic resin under high heat and pressure, finished with a printed decorative surface. The phenolic core gives the sheet its strength and dimensional stability.

Artis carries the IGBC (Indian Green Building Council) green-product mark and is manufactured in India.

Source through our network

Find your nearest Artis distributor.

Artis sells through 70+ distributors across India. Shortlist the designs you like, note their codes, and we'll connect you with an authorised distributor for samples and pricing.

Find a distributorRequest a sample